Axis-communications PS-24 Instrukcja Użytkownika Pobierz pdf (Strona 4)

PS-24 Mains Adaptor

Alternative installation - PSU box

The vandal-proof PSU box is an optional accessory which can be mounted either on a pole

or on a flat surface.

1. Remove the top lid of the PSU box by

removing the 4 screws.

2. Place the PS-24 with the 4 cable glands

in the opening at the bottom of the PSU

box.

3. Replace the lid and lock it by tightening

the 4 screws.

4. Use the holder for the pole mount or use

the supplied screws to mount the PSU on

a pole or a flat surface.

5. Follow the instructions for the outdoor

housing to complete the installation.

Note:

• Use 4pcs. sleeve anchor with flange nut, drill size 6mm, M6, length >= 50mm (concrete screw, not included).

• Pole mount - the recommended pole diameter for this pole box is 130-140mm.

Examples of installation (PSU box and pole/wall mount)

Cable

glands

Screws

Holder for

pole mount

Pole box mounting

Gooseneck

tube

Outdoor housing

for camera

Wall box mounting

Gooseneck

tube

Outdoor housing

for camera

1 2 3 4 5 6 7 8 9 ... 15 16

Komentarze do niniejszej Instrukcji

Brak uwag